Skip to main content

Which blasting methods are available?

Injection blasting

The injection system takes its name from the injector located in the jet gun. As soon as the compressed air starts to flow via the compressed air hose through the injector of the jet gun a negative pressure is created. As a result, blasting media is sucked in from the funnel, via a “discharge cup”. In the injector chamber, the drawn-in blasting media is mixed with the stream of compressed air. Via the nozzle of the blasting gun the blasting media travel at great speed to the surface to be blasted.

Compressed air blasting

With compressed air blasting, a vessel of air and blasting medium are simultaneously pressurized and added to the air flow. This is a slightly more expensive solution, because of the vessel and some additional control valves and valves are required. Blasting medium falls into the compressed air flow by its own specific weight and is transported to the nozzle, where it is aimed at the product to blast the product. A main valve, filling cone, venting valve, blasting media valve and pump valve are present in the system.


With compressed air blasting, a relatively larger blasting media can be used for blasting with less air consumption. The efficiency of a compressed air system is higher, because a lot of energy is lost in an injection system when sucking in the blasting medium. In general it can be said that injection (or injector) systems are only used in case of:

  • Very thin material thicknesses
  • Relatively low production numbers are required
  • Only very limited contaminants are present on the surface.
  • If investments have to be made for very limited costs

Main PRO’s and CON’s of injection blasting vs compressed air blasting:

Small and easy to operate equipment Not suitable for all blasting media. (e.g. cast iron and steel or with a larger grain)
Rather low production numbers Not suitable for removing mill scale, thick rust or paint layers
Lower sensitivity to moist compressed air

More information?

Our consultants are ready to answer your questions by phone, via email or WhatsApp (button below).

Contact usBack to all articles


Straaltechniek International Group

We offer the most advanced solutions in the (high-end) metal processing industry and supply customisation for each specific problem.

A global network of sales and service points provides support in the execution of our extremely diverse range of projects.

©2021 Straaltechniek International Group. All rights reserved. Terms and conditions. Privacy statement.

Website by: Puntmedia

Open chat
Kan vi hjälpa dig?
Kan vi hjälpa dig?