Manufacturer of custom made
shot peening machines

The cabinet entails the protected area where the shot peening process takes place. Various designs are available, from prefab panels for large machines to one-off constructions for specialised solutions.

For the highest flexibility, one or multiple 6-axis industrial robots manoeuvres the nozzle(s). Another technical solution is our gantry system, up to 5-axis.

The gear table is a typical solution we implement to rotate- and or position the component to be shot peened. In many occasions the main door is fitted with one- or more gear tables that holds the component to be processed.

Media flow is closed loop controlled but the valve needs to be accurately calibrated. Our Automated Valve Calibration (AVC) equipment calibrates, and when necessary, adjust the closed loop valve.

All our machines include fully automated recovery, cleaning, and classification of your media.

The double chamber peening pot is the heart of your machine. The top vessel automatically tops off the bottom vessel during the peening cycle. This enables guaranteed continuous peening.

Media flow as well as compressed air settings are closed loop controlled. This ensures that these two of the utmost critical parameters are closely monitored and, more important, automatically adjusted within the set tolerances.

Electronics are a very important component of blasting and shot peening installations. In conventional manual blasting rooms as well as robot-controlled installations.

Our heavy-duty filters are extremely cost-efficient and are also optimized for short maintenance intervals.